计算机控制的SEESR实验系统的研制

SEESR(Simultaneous Electrochemical ESR)是研究电极过程中的自由基中间体行为的理想和方便的手段。在以前研制的ESR仪数据系统的基础上,我们应用IBM-PC/XT微机与JES-FE1XG型(JEOL产)ESR谱仪及HDV-7型恒电位仪研制了一套由计算机控制的SEESR实验装置。该系统可以完成包括循环伏安法、电流阶跃、电位阶跃及电位反转等多种电化学方法的SEESR实验。系统还具有包括数据平滑、曲线拟合等功能的多种数据处理软件,使用方便。我们应用模型化合物对该系统进行了实际测量,所得结果与文献报道一致。     

智能温湿度测控仪

本文提出一种利用MCS-51系列单片机实现温湿度自动检测和控制的智能仪表,文中对仪器的工作原理、硬件组成和软件设计作了较为详细的介绍。     

排列互比法用于超精测角的研究

作者分析了我互比法现行的两种数据处理方法的缺点，提出了应用最小二乘法原理推导出合理的数据处理方法。本文还首次从理论上阐明了排列互比法测量结果中出现一次谐波系统误差的原因，提出了减少和消除这一些系统误差的方法，并给实验验证。     

The effect of liquid push out of the material capillaries under sulfate ion diffusion in cement composites

The paper treats complex phenomena that accompany the diffusion of sulfate ions into cement paste or systems. The ion distribution within the material was studied by designing a specific diffusion model. The model accounts for two phenomena: capillary filling with products of the chemical reactions and the subsequent liquid push out of the capillary. The approach allows to quantify the concentration of free ions having penetrated the cement stone and that of chemically reacted ions, and to assess the liquid push out. Experimental data are also presented.     

国外模拟IC的发展现状分析

本文主要根据电子整机的发展要求,从集成化、高性能和高可靠等三方面分析国外模似IC的发展,进而说明模拟IC总的发展趋势及其表现。最后指出,模拟IC正面临一个新的变革时期。     

IR2172在电机数字控制系统中的应用

IR2172是国际整流器公司推出的电流传感芯片。介绍了IR2172的结构特点和工作原理以及在永磁同步电机数字控制系统中的应用。     

科研人员业绩考核设计

对科研人员业绩的考核，应具有一定程度可量化的考核指标和一套完整的考核体系。文章对科研人员业绩评价的内容及其指标体系、考核与管理办法进行了设计，认为科研人员业绩考核指标可以分为劳动数量、劳动质量和劳动成果3类，具体内容包括其科研工作量、科研责任、科研成果的表现形式及其数量、成果的学术价值与利用率，以及科研人员科研技能水平等。     

A knowledge-based system for sensor selection

This paper presents a Knowledge-based system (KBS) developed to allow users, who may not be knowledgeable about sensors, to select sensors suitable for their specific needs. The KBS runs on a micro-computer. The selection criteria are user specified and are based on the desired measurement parameters. The system output includes all of the operational and dimensional parameters of the recommended sensor, price, and vendor information.     

Ultrasonic measurement of the inter-electrode gap in electrochemical machining

During the process of electrochemical machining the dependency of the inter-electrode gap with time and process parameters can be used to determine process characteristics and to define the shape of the workpiece surface relative to the tool surface. Defining process variables to map out the required gap-time function requires the use of time-consuming iterative trials. In-line monitoring of the gap would enable process control and tool to workpiece transfer characteristics to be achieved (for ideal conditions) without the requirement to generate such parameter maps. This work explores the use of ultrasound applied as a passive, non-intrusive, in-line gap measurement system for ECM. The accuracy of this technique was confirmed through correspondence between the generated gap-time and current time data and theoretical models applicable to ideal conditions. Gap measurements are also used to demonstrate and quantify the degree of departure from ideal behaviour for an In718/chloride system as the electrolyte flow rate is reduced from 16 to 4 l min⁻¹. The monitoring of the gap size has also been shown to be effective when determining shape convergence under ideal conditions, for the example case of a 2D sinusoidal profile.     

编辑出版自动化技术在医药专业期刊编辑部的初步应用探讨

本文首先概述了编辑出版自动化技术的概念及最新进展,然后就其在医药专业期刊编辑部的初步应用进行了探讨,论述了计算机、网络、数据库技术在稿件的选题、组稿、编辑、审校、排版、印刷、出版中的具体应用,强调了构建基于网络的编辑出版自动化系统对期刊现代化建设的重要作用。